NEWSC-AH150Metal mask cleaner
Overwhelming productivity in a single unit.
- New product
- Fast even with aqueous cleaner
- Wash and dry together
- Frame stays dry
Shorter cleaning cycles, better finish quality, and lower operating cost—delivered together.
Speed breakthrough
Fastest in the series: from 3 min 30 sec
Cycle time per stencil drops from about 8 minutes on the previous model to 3 minutes 30 seconds. Strong cleaning performance is retained while throughput rises sharply—helping shorten lead times and keep lines running efficiently.
Lower operating cost
Half the fluid. Half the cleaning-head replacements.
Fluid consumption falls to less than half of the previous model, and costly cleaning-head replacement intervals are cut in half. Environmental load goes down while long-term cost performance improves.
Outstanding finish
New design technology tightly controls dripping and residual flux. Even fine-aperture masks finish with high precision, supporting lower defect rates.
Simple maintenance
More space around the filter makes replacements easier. Auto fill/drain switches sit within easy reach, reducing operator burden and supporting smooth line operation.
Works well with
Tension gauge
Loss of tension after cleaning metal masks can cause bleed, bridging, and print misalignment. Lightweight and compact for quantitative checks on the floor.
Learn more →
Specifications
- Manufacturer
- SAWA CORPORATION
- Model
- SC-AH150
- Dimensions
- W 970 × D 1,198.5 × H 1,667 mm
- Power supply
- AC 100 V 50/60 Hz
- Cleaning fluid (dedicated)
- HA-2789
- Compatible metal masks
- L 550 × W 600 mm *1L 550 × W 650 mm *1L 736 × W 736 mm
- Air
- 0.4 MPa
- Exhaust duct
- Air velocity 5.5 m/sec
- Specifications and appearance are subject to change without notice for improvement.
- *1 Requires the included adapter.
- Cleaning time varies with specifications and conditions.
Metal mask cleaner comparison
| Model |  SC-AH150 |  |  |  |
|---|---|---|---|---|
| Best for | High-volume / speed | High performance / automation | Standard / compact footprint | Bump / large format |
| Compatible size(mm) | L 550 × W 600L 550 × W 650L 736 × W 736 | L 550 × W 600L 550 × W 650L 736 × W 736 | L 550 × W 600L 550 × W 650L 736 × W 736 | □320〜□750 |
| Dimensions(mm) | W 970D 1,198.5H 1,667 | W 877D 1,140H 1,666 | W 1,290D 553H 1,466 | W 780D 1,100H 1,847 |
| Highlights | From 3 min 30 sec per mask. Fluid use about half of conventional | Ultrasonic + vacuum. Also supports 5-mask continuous runs | 500+ units installed. Versatile machine with a small footprint | Ultrasonic + spray. Also handles ink paste |
5-mask continuous automation can be added later to SC-AH100-LV via SA-MAC5.
Contact
Questions or consultation requests are welcome.