SC-SGA500Cylinder cleaner
For printed electronics—industry-first cylinder cleaner.
- 300-line class
- 2–3 min per cylinder
- Compact design
Proprietary ultrasonics clean high-resolution gravure cylinders from the cell floor up. One cylinder in 2–3 minutes, including 300-line fine work.
Overview
High-resolution cell cleaning
Even 300-line fine patterns
Proprietary ultrasonic technology cleans from the cell floor. Built for high-resolution cylinders used in printed electronics.
High speed
2–3 minutes per cylinder
A 2–3 minute cycle per cylinder shortens changeover time.
Particle recovery
Built-in 5 μm filter
An internal 5 μm filter recovers most conductive-paste particles. Compact footprint with minimal protrusions.
Specifications
- Manufacturer
- SAWA CORPORATION
- Model
- SC-SGA500
- Dimensions & weight
- W 1,500 × D 750 × H 1,600 mm (including protrusions)Approx. 240 kg
- Power supply & current
- AC 100 V 50/60 Hz450 VA
- Air
- 0.4 MPa300 NL/min
- Exhaust duct
- Air velocity 5 m/sec
- Specifications and appearance are subject to change without notice for improvement.
Cylinder cleaner comparison
| Model |  SC-SGA500 |  |  |
|---|---|---|---|
| Best for | High-definition PE | Gravure & anilox | In-press / portable |
| Compatible size(mm) | 300-line class | Length 700–1,350Circumference 345–942 | φ300 以下 |
| Dimensions(mm) | W 1,500D 750H 1,600 | W 2,769D 970H 1,375 | W 320D 640H 810 |
| Highlights | From the cell bottom. 2–3 minutes per cylinder | Cleans cells and flanges at the same time | Clean while mounted on the press |
Contact
Questions or consultation requests are welcome.