NSP-ProNitrogen generator
Space-saving, energy-efficient PSA nitrogen generator.
- Bellpearl®
- Power −27% max
- 1.5× output
- 8,000 h maintenance
Uses advanced Bellpearl® adsorbent. Raw-air demand drops sharply—power use cut by up to 27%, nitrogen output is 1.5× the previous NSP series. Suited to SMT line upgrades/expansions and switching from liquid nitrogen.
Overview
Energy saving & high output
Less raw air, 1.5× nitrogen
Advanced Bellpearl® cuts raw-air demand sharply. Power use drops by up to 27%; nitrogen output is 1.5× the previous NSP series.
Footprint is about 10% smaller. High-pressure supply with low noise; maintenance interval extended to 8,000 hours.
Case study 1
SMT｜Replacing an aging PSA
Replaced ~20-year-old third-party PSAs with two KN4-60NSP-Pro units—higher nitrogen output plus major cuts in electricity and footprint.
Legacy: about 105 Nm³/h and 112 kW total → NSP-Pro: 120 Nm³/h and 59 kW. Output +15 Nm³/h; footprint cut by over ~40% per unit (also large annual power savings at 8 h/day, 20 days/month).
Case study 2
SMT｜Adding reflow capacity
A reflow expansion looked short on nitrogen, but updating one existing unit to KN4-60NSP-Pro covered the added demand.
Legacy: 99.99%, 40 Nm³/h (37 kW compressor) → NSP-Pro: 99.99%, 60 Nm³/h (22 kW). 1.5× output and one compressor size down.
Case study 3
Heat treatment｜Switching from liquid N₂
Liquid-nitrogen (tanker) price rises led to KN4-100NSP-Pro installs at overseas and domestic plants after verifying PSA nitrogen (N₂+Ar) had no product impact.
Most running cost is compressor electricity. A one-size-smaller compressor vs. peers drove the choice. No tanker receiving; nitrogen supply stays in-house.
Lineup
Six models by purity and output
Oil-removal filter and activated-carbon bed are standard. Output figures are for ambient 5–30°C; purity is N₂+Ar by volume.
Basic specifications
| Item | KN4-60 | KN4-100 | KN3-70 | KN3-120 | KN2-90 | KN2-150 |
|---|---|---|---|---|---|---|
| N₂ purity | 99.99% | 99.99% | 99.9% | 99.9% | 99% | 99% |
| Output | 60 Nm³/h | 100 Nm³/h | 70 Nm³/h | 120 Nm³/h | 90 Nm³/h | 150 Nm³/h |
| N₂ pressure | 0.6 MPa | 0.5 MPa | 0.55 MPa | 0.5 MPa | 0.5 MPa | 0.5 MPa |
| Compressor | 22 kW | 37 kW | 22 kW | 37 kW | 22 kW | 37 kW |
| Dimensions | 1,210×1,520×1,920 | 1,500×1,770×2,100 | 1,210×1,520×1,920 | 1,500×1,770×2,100 | 1,210×1,520×1,920 | 1,500×1,770×2,100 |
| Weight | 2,050 kg | 3,050 kg | 2,050 kg | 3,050 kg | 2,050 kg | 3,050 kg |
Specifications
- Method
- PSA nitrogen gas generator (NSP-Pro series)
- Manufacturer
- Air Water Mechatronics
- Representative models
- KN4-60NSP-Pro / KN4-100NSP-Pro (purity 99.99%)KN3-70NSP-Pro / KN3-120NSP-Pro (purity 99.9%)KN2-90NSP-Pro / KN2-150NSP-Pro (purity 99%)
- Power
- AC 100–240 V 50/60 Hz 0.2 kW
- Standard equipment
- Oil-removal filter, activated-carbon bed
- Table headers use short names (e.g. KN4-60); full model names are KN4-60NSP-Pro, etc.
- Nitrogen output figures are for ambient 5–30°C.
- Purity is nitrogen + argon by volume.
- Export units may differ in performance, power, and pressure-vessel standards by destination.
- Specifications and appearance are subject to change without notice for improvement.
Contact
Questions or consultation requests are welcome.